SKF 6309 M/C3 Deep Groove Ball Bearing - 45 mm ID, 100 mm OD, 25 mm Width, Cylindrical Bore, C3 Impact Socket Set The 28-piece sliding hammer set

The 28-piece sliding hammer set 19 is used for contactless extraction of internal bearings

and ball joint pullers in various sizes

Bore Diameter 35 mm Outside Diameter 80 mm Overall Width 21 mm Contact Angle 40 ° Duplex Type Single Closure Type Open Precision Rating ABEC 3 (ISO Class 6) Bearing Material Steel Maximum RPM 10000 RPM Cage Material Bearing steel Finish/Coating Uncoated Outer Ring Width 21 mm

and safely

SKF 6309 M/C3 Deep Groove Ball Bearing - 45 mm ID, 100 mm OD, 25 mm Width, Cylindrical Bore, C3 Impact Socket Set The 28-piece sliding hammer setDeep Groove Ball Bearing with increased clearance Deep Groove Ball Bearings are versatile and widely used bearings. They can accommodate radial loads and, to a lesser extent, axial loads in both directions. Known for their low friction and quiet operation. Manufactured to precision tolerance class for demanding applications. Suitable for use in a wide range of industrial applications where reliability and performance are essential.